1. FAQ
2. Product

Each of the rotary axes we offer has clear advantages.[LRA-0730]: Excellent for customers who process shorter cylindrical products, as it can hold two coffee cups or three cylindrical whiskey glass...

1. FAQ
2. Product

The MOPA series can apply colored markings to metal, which is not possible with a standard fiber laser.

1. FAQ
2. Product

Yes! Please contact our support team for detailed instructions on how to operate the laser without this cover.

1. FAQ
2. Product

Yes. K40 Plus comes with LaserGRBL software; the 50-150W CO2 machine comes with RDworks, and the fiber laser comes with EZCad.

1. FAQ
2. Product

The air assist performs four main functions: extinguishing the flame, evacuating the kerf for deeper beam penetration, cooling the edges of the kerf to prevent sticking and re-welding of plastics, ...

1. FAQ
2. Product

With an air assist system, you get better laser penetration into the material, which improves your cutting capabilities. It also helps to re-stabilize the edges of plastics so that they don't hang ...

1. FAQ
2. Product

For 40-100W CO2 lasers (except for the Pronto series), you do not need a chiller; however, it is convenient. For occasional use, a 5-gallon recirculating bucket should not have a significant temper...

1. FAQ
2. Product

The 5200 Serie is recommended for applications that are not in temperature-controlled environments for continuous use or at medium or high power usage. The 5202 Serie is internally identical to the...

1. FAQ
2. Product

If the fumes cannot be vented outside or if you are working with a material that produces a lot of fumes, it is recommended that you purchase a fume extractor.

1. FAQ
2. Product

Your inline fan should match the flow rate of the internal exhaust fans (100 CFM) if you leave the internal fans in place to prevent backflow into the motherboard. Alternatively, you can remove the...