Maker
- The power supply for the drivers is not lighting up.
- The power supply for the mainboard and safety relays is not lighting up
- Pattern preview problems
- Problems with panel button(s)/key(s)
- No Laser fired
- Laser not firing with an electric arc/buzzing sound
- Laser tube not responding
- Weakened laser performance
- Unusual laser spot
- Laser firing when not supposed to
- Laser emission upon powering on
- Laser emission when framing/moving between patterns
- Laser emission despite no coolant flow
- Laser emission despite the open cover
- Ammeter always reading about 8mA across the power settings
- Low ammeter readings across the power settings
- Problems with laser beam
- Purplish laser beam
- Whitish laser beam in the laser tube
- Reddish laser beam in the laser tube
- Split beam inside the laser tube
- External laser spot split
- Laser beam hitting the cathode metal ring
- Unstable laser beam in laser tube
- Unaligned Laser
- Reduced laser power
- Problems with cut lines
- Line too thick
- Double line when cutting or engraving
- Pattern distortion