1. FAQ
2. Product

There are several ways to do this. With RDWorks or LightBurn, you can prepare an .RD file and bring it with you on a USB flash drive. Alternatively, you can also directly connect to the laser via a...

1. FAQ
2. Product

RDWorks & Lightburn support:Image files (.bmp .jpg .jpeg .png .gif .tif .tiff .tga .webp)Vector files (.ai .pdf .sc .dxf .gc .gcode .nc .hpgl .plt .rd .scpro2 .svg)Lightburn only supports: (.lbrn ....

1. FAQ
2. Product

The laser devices have a built-in air pump and an exhaust fan. The air pump is located inside the machine housing and the exhaust fan (depending on the machine model) can be found on the left side ...

1. FAQ
2. Product

We recommend using white lithium grease on your machine. This is used on the linear guide rails (X, Y axes) and ball screws (Z, U axes).

1. FAQ
2. Product

The socket on the rear panel can be used to connect chillers, water pumps, air purifiers, etc. Components such as the air pump or exhaust fan that are built into the laser do not need to be plugged...

1. FAQ
2. Product

Our 40-watt lasers feature a 42-two-phase four-wire stepper motor. All other machines use a (Kangda) 57 two-phase four-wire stepper motor on the X and Y axes. The motor on the Z axis for autofocus ...

1. FAQ
2. Product

Complete system (without removing the pass-through door and protective cover) - Class 1Laser tube - Class 4

1. First Time Setup
2. Accessory

Sample model: CW-5200 German VersionEnglish Version

1. First Time Setup
2. Accessory

Model: LAT-1655 German Version English Version

1. First Time Setup
2. Accessory

Model: AFF100 German Version English Version